| Product Description |
Anti-Static Moisture Barrier Bags (also known as foil bags, alufoil bags or Mylar bags), are one of the most effective packaging solutions on the market today to protect against corrosive damage caused by humidity, moisture, oxygen, salt spray, aromas, grease and other airborne contaminants.
Surface resistivity
Top layer: <109ohms/sq
Aluminum foil: <102ohms/sq
Inner layer: <109ohms/sq
Physical properties
Stretching resistance at break: ≥70N
Elongation at break: ≥40％
Peel force:≥50N
Tearaway force: ≥12N
Anti Static Shielding Bags Description
Shenzhen HORB's Anti Static Shielding Bag has metalized film laminated to low-charging bubble material. The bag protects ESD sensitive contents from electrostatic fields, electrostatic discharges (ESD), and physical damage.
Features:
Thickness: 7.5Microns
Surface Resistivity: <10E9ohm/sq. ASTM D618 At 15% RH.ETS 803 probe 100 Volts
Abrasion Resistance: 1000Cycles with no damage CSI Mode CS-39 Head Load227 gms Abradent Rough Corrugated
Metallized Layer Resistance: <10E3ohm/sq.
Light Transmission: 40%-0.4 Optical Density
Triboelectric Charging: <100V E1A 541 Appendix C average. Triboelectric Nanocoulombs Quartz<.13nc/in2 Teflon<.13nc/in2
Static Decay: 5000-0 Volts <0.01second FTMS 101B Method 4046
Capacitance Probe: <10 Volts Differentical-E1A 541
Corrosion: No visible signs detected FTMS 101C Method 3005
Characteristics:
Tensile Strength: >18 lbs./in ASTM D882
Tear Initiation: >2.5 lbs./in ASTM 1004
Puncture Resistance: >10e0 p.s.l ASTM D3420
Seam Strength: >8 lbs./in ASTM D882
MVTR Barrier >0.2 gm/100 in-2/24 hrs. ASTM E 96
Oxygen Barrier: >0.5 cc/100 in-2/24 hrs. ASTM D3958
Heat Sealing:
Temperature: 220-240℃
Time: 0.5-3.5seconds
Pressure: 30-70 p. s. l
Anti Static PE Bags
Description
Antistatic Polyethylene (PE) Bags are fabricated from low density Polyethylene having antistatic property to protect components (such as PC board, IC integrated circuit, CD driver, HD etc.) from ESD damages. These bags are available in roll tubing, zip lock, cut sheet, and so forth.
Features:
* Tough, puncture resistant, often re-used
* Made of linear polyethylene with carbon added, 0.07mm thick
* Rs:103 ~ 105Ω, independent of humidity
* Heat sealable, recyclable
* Surface resistivity: <10E11ohms/sq
Anti Static PE Grid Bags
Description
Anti Static PE Grid Bags are fabricated from low density Polyethylene having antistatic property to protect components (such as PC board, IC integrated circuit, CD driver, HD etc.) from ESD damages. These bags are available in roll tubing, zip lock, cut sheet, and so forth.
Features:
* Material: LDPE
* Clear anti-static PE bag printed with network black conductive oil ;
* Offers excellent electrostatic discharge performance and conductive function ;
* Protects contents from damage of electrostatic;
* Translucent, so the goods inside can be easily recognized from outside;
* Company pattern or logo can be printed as per customer's specification
* Surface resistivity: Inter layer:<1012ohms/sq, Outer layer:<105ohms/sq
Static Shielding Bubble Bags
Description
Shenzhen HORB's ESD Static Shielding Bubble Bag has metalized film laminated to low-charging bubble material. The bag protects ESD sensitive contents from electrostatic fields, electrostatic discharges (ESD), and physical damage.
Features:
* Combines ESD shielding and mechanical protection
* Shields about twice as well as a normal shielding bag of equivalent size
* Flap can be tucked in to enclose contents or folded down and held in place by a label
* Inner layer is amine-free antistatic film
* Middle layer is antistatic bubble
* Outer layer is buried metal shielding film
* Rs inside and out: 10E9Ω to 5*10E10Ω, T1000:<2 sec at 50% RH
|